Publikationen

Durch Klick auf den Titel einer Veröffentlichung gelangen Sie zum elektronischen Volltext beim entsprechenden Verlag. Ein Klick auf den [Info]-Button öffnet ein Fenster mit dem Abstract und dem zugehörigen Bibtex-Eintrag.

2023
[218]	Lünser, K., Undisz, A., Wagner, M. F.-X., Nielsch, K., Fähler, S.: Solving the puzzle of hierarchical martensitic microstructures in NiTi by (111)-oriented epitaxial films, Materials Today Advances 20, 100441, 2023. [Info]
[217]	Hammer, N., Ondruschka, B., Berghold, A., Kuenzer, T., Pregartner, G., Scholze, M., Schulze-Tanzil, G. G., Zwirner, J.: Sample size considerations in soft tissue biomechanics, Acta Biomaterialia 169, 168-178, 2023. [Info]
[216]	Scholze, M., Wagner, M. F.-X., Dietrich, D., Elibol, C., Fritsch, S., Illgen, C., Bohne, B., Böhme, M., Colas, D., Frint, P.: Effect of equal-channel angular pressing on ordering kinetics and twinning in an 18-carat AuCuAg alloy, Journal of Alloys and Compounds 958, 170472, 2023. [Info]
[215]	Illgen, C., Winter, S., Haase, R., Böhme, M., Reiser, N., Hatscher, A., Psyk, V., Kräusel, V., Wagner, M. F.-X.: Experimental and Numerical Process Design for Press Partitioning of the New Q&P Steel 37SiB6., Metals 13, 1346, 2023. [Info]
[214]	Gruber, M., Illgen, C., Lichte, F., Hartmann, C., Frint, P., Wagner, M. F.-X., Volk, W.: Establishing Equal-Channel Angular Pressing (ECAP) for sheet metals by using backpressure: manufacturing of high-strength aluminum AA5083 sheets, The International Journal of Advanced Manufacturing Technology 127, 3481-3495, 2023. [Info]
[213]	Reuther, F., Winter, S., Fritsch, S., Kräusel, V., Wagner, M. F.-X., Psyk, V.: Numerical and Experimental Investigations on Tube Section Flattening for Parameter Identification and Advanced Material Modeling of Tubes, Journal of Manufacturing and Materials Processing 7, 91, 2023. [Info]
[212]	Małachowska, A., Kovarik, O., Sajbura, A., Sokolowski, P., Lindner, T., Scholze, M., Karlík, M.and Čech, J., Lampke, T.: Mechanical and fatigue properties of plasma sprayed (Fe_0.9Co0.1)₇₆Mo₄(P_0.45C_0.2B_0.2Si_0.15)₂₀ and Fe_56.04Co_13.45Nb_5.5B₂₅ metallic glasses, Surface and Coatings Technology 459, 129361, 2023. [Info]
[211]	Zwirner, J., Ondruschka, B., Scholze, M., Thambyah, A., Workman, J., Hammer, N., Niestrawska, J. A.: Dynamic load response of human dura mater at different velocities, Journal of the Mechanical Behavior of Biomedical Materials 138, 105617, 2023. [Info]
2022
[210]	Härtel, M., Illgen, C., Panzner, T., Bruder, E., Schmaltz, S., van Petegem, S., Willner, K., Durst, K., van Swygenhoven, H., Wagner, M. F.-X.: Mechanical, microstructural and in-situ neutron diffraction investigations of equi-biaxial Bauschinger effects in an interstitial-free DC06 steel, International Journal of Plasticity 159, 103478, 2022. [Info]
[209]	Scholze, M., Safavi, S., Ramezani, M., Ondruschka, B., Hammer, N.: Fatigue Testing of Human Flexor Tendons Using a Customized 3D-Printed Clamping System, Applied Sciences 12, 7836, 2022. [Info]
[208]	Steel, S., Pearcy, Q., Li, K. C., Scholze, M., Zwirner, J.: The relationship between the pH value of a hydration solution and the biomechanical properties of Crosado-embalmed human iliotibial bands, Journal of the Mechanical Behavior of Biomedical Materials 132, 105266, 2022. [Info]
[207]	Gruber, M., Leitner, P., Auer, M., Illgen, C., Frint, P., Wagner, M. F.-X., Volk, W.: A Novel Method for the Determination of High Temperature FLCs of ECAP-Processed Aluminum AA5083 Sheet Metal, Key Engineering Materials 926, 1039-1050, 2022. [Info]
[206]	Illgen, C., Bohne, B., Wagner, M. F.-X., Frint, P.: Thermal stability of SPD-processed aluminum alloys - Internal friction as an indication for recovery, recrystallization and abnormal grain growth, Journal of Materials Research and Technology 17, 1752-1759, 2022. [Info]
[205]	Gruber, M., Spoerer, T., Illgen, C., Frint, P., Wagner, M. F.-X., Lechner, P., Volk, W.: Effect of Equal-Channel Angular Pressing and Targeted Heat Treatment on Aluminum AA7075 Sheet Metal, Proceedings: Characterization of Minerals, Metals, and Materials 2022, Springer International Publishing, 25-36. [Info]
[204]	Pearcy, Q., Jeejo, M., Scholze, M., Tomlinson, J., Dressler, J., Zhang, M., Zwirner: Biomechanics of vascular areas of the human cranial dura mater, Journal of the Mechanical Behavior of Biomedical Materials 12, 104866, 2022. [Info]
[203]	Zwirner, J., Ondruschka, B., Pregartner, G., Berghold, A., Scholze, M., Hammer, N.: On the correlations of biomechanical properties of super-imposed temporal tissue layers and their age-, sex-, side- and post-mortem interval dependence, Journal of Biomechanics 130, 110847, 2022. [Info]
[202]	Berndt, N., Frint, P., Böhme, M., Müller, S., Wagner, M. F.-X.: On radial microstructural variations, local texture and mechanical gradients after cold extrusion of commercially pure aluminum, Materials Science and Engineering: A 850, 143496, 2022. [Info]
2021
[201]	Winter, S., Werner, M., Haase, R., Psyk, V., Fritsch, S., Böhme, M., Wagner, M. F.-X.: Processing Q&P steels by hot-metal gas forming: Influence of local cooling rates on the properties and microstructure of a 3rd generation AHSS, Journal of Materials Processing Technology 293, 117070, 2021. [Info]
[200]	Gruber, M., Yang, Y., Illgen, C., Frint, P., Wagner, M. F.-X., Volk, W.: Thermomechanical Analysis and Experimental Validation of ECAP for Aluminum Sheet Metal, in Forming the Future, Springer International Publishing, 2021, 1775-1790. [Info]
[199]	Zwirner, J., Ondruschka, B., Scholze, M., Workman, J., Thambyah, A., Hammer, N.: The dynamic impact behavior of the human neurocranium, Scientific Reports 11, 2021. [Info]
[198]	Illgen, C., Bohne, B., Wagner, M. F.-X., Gruber, M., Volk, W., Frint, P.: Facing the Issues of Sheet Metal Equal-Channel Angular Pressing: A Modified Approach Using Stacks to Produce Ultrafine-Grained High Ductility AA5083 Sheets, Advanced Engineering Materials, 2100244, 2021. [Info]
[197]	Winter, S., Scholze, M. and Wagner, M. F.-X.: Effect of sample geometry on the macroscopic shear deformation of the titanium alloy Ti-10V-2Fe-3Al subjected to quasi-static and dynamic compression-shear loading, IOP Conference Series: Materials Science and Engineering 1147, 012014, 2021. [Info]
[196]	Drossel, W.-G., Bobbert, M., Böhme, M., Dammann, C., Dittes, A., Gießmann, M., Hühne, C., Ihlemann, J., Kießling, R., Lampke, T., Lenz, P., Mahnken, R., Meschut, G., Müller, R., Nier, M., Prussak, R., Riemer, M., Sander, S., Schaper, M., Scharf, I., Scholze, M., Schwöbel, S.-D., Sharafiev, S., Sinapius, M., Stefaniak, D., Tröster, T., Wagner, M. F.-X., Wang, Z., Zinn, C.: Hybridprofile für Trag- und Crashstrukturen, in Intrinsische Hybridverbunde für Leichtbautragstrukturen, Springer Berlin Heidelberg, 2021, 121-203. [Info]
[195]	Winter, L., Hockauf, K., Scholze, M., Hellmig, R. J., Lampke, T.: Influence of Pre-Aging on the Artificial Aging Behavior of a 6056 Aluminum Alloy after Conventional Extrusion, Metals 11, 385, 2021. [Info]
[194]	Zwirner, J., Safavi, S., Scholze, M., Li, K. C., Waddell, J. N., Busse, B., Ondruschka, B., Hammer, N.: Topographical mapping of the mechanical characteristics of the human neurocranium considering the role of individual layers, Scientific Reports 11, 3721, 2021. [Info]
[193]	Lorenz, M., Pelliccia, L., Werner, M., Scholze, M., Klimant, P., Heyde, C.-E., Klima, S., Hammer, N.: Wrist at risk? - Considerations derived from a novel experimental setup to assess torques during hip reaming with potential implications on the orthopedic surgeons' health, Journal of the Mechanical Behavior of Biomedical Materials 113, 104160, 2021. [Info]
[192]	Zwirner, J., Ondruschka, B., Scholze, M., Schulze-Tanzil, G., Hammer, N.: Biomechanical characterization of human temporal muscle fascia in uniaxial tensile tests for graft purposes in duraplasty, Scientific Reports 11, 2127, 2021. [Info]
2020
[191]	Rymer, L.-M., Lindner, T., Frint, P., Löbel, M., Lampke, T.: Designing (Ultra)Fine-Grained High-Entropy Alloys by Spark Plasma Sintering and Equal-Channel Angular Pressing, Crystals 10, 1157, 2020. [Info]
[190]	Wagner, M. F.-X., Nostitz, N., Frint, S., Frint, P., Ihlemann, J.: Plastic flow during equal-channel angular pressing with arbitrary tool angles, International Journal of Plasticity 134, 102755, 2020. [Info]
[189]	Zwirner, J., Ondruschka, B., Scholze, M., Schulze-Tanzil, G., Hammer, N.: Load-deformation characteristics of acellular human scalp: assessing tissue grafts from a material testing perspective, Scientific Reports 10, 2020. [Info]
[188]	Zwirner, J., Ondruschka, B., Scholze, M., Hammer, N.: Surface coating and speckling of the human iliotibial tract does not affect its load-deformation properties, Scientific Reports 10, 2020. [Info]
[187]	Zwirner, J., Scholze, M., Ondruschka, B., Hammer, N.: What Is Considered a Variation of Biomechanical Parameters in Tensile Tests of Collagen-Rich Human Soft Tissues? - Critical Considerations Using the Human Cranial Dura Mater as a Representative Morpho-Mechanic Model, Medicina 56, 520, 2020. [Info]
[186]	Niessen, B., Schumacher, E., Lueg-Althoff, J., Bellmann, J., Böhme, M., Böhm, S., Tekkaya, A. E., Beyer, E., Leyens, C., Wagner, M. F.-X., Groche, P: Interface Formation during Collision Welding of Aluminum, Metals 10, 1202, 2020. [Info]
[185]	Burrow, K., Young, W., Hammer, N., Safavi, S., Scholze, M., McConnell, M., Carne, A., Barr, D., Reid, M., Bekhit, A. E.-D.: The Effect of the Supplementation of a Diet Low in Calcium and Phosphorus with Either Sheep Milk or Cow Milk on the Physical and Mechanical Characteristics of Bone using A Rat Model, Foods 9, 1070, 2020. [Info]
[184]	Zwirner, J., Ondruschka, B., Scholze, M., Schulze-Tanzil, G., Hammer, N.: Mechanical properties of native and acellular temporal muscle fascia for surgical reconstruction and computational modelling purposes, Journal of the Mechanical Behavior of Biomedical Materials 108, 103833, 2020. [Info]
[183]	Bellmann, J., Lueg-Althoff, J., Niessen, B., Böhme, M., Schumacher, E., Beyer, E., Leyens, C., Tekkaya, A. E., Groche, P., Wagner, M. F.-X., Böhm, S.: Particle Ejection by Jetting and Related Effects in Impact Welding Processes, Metals 10, 1108, 2020. [Info]
[182]	Zwirner, J., Ondruschka, B., Scholze, M., Hammer, N.: Passive load-deformation properties of human temporal muscle, Journal of Biomechanics 106, 109829, 2020. [Info]
[181]	Mwangi, J. W., Bui, V. D., Thüsing, K., Hahn, S., Wagner, M. F.-X., Schubert, A.: Characterization of the arcing phenomenon in micro-EDM and its effect on key mechanical properties of medical-grade Nitinol, Journal of Materials Processing Technology 275, 116334, 2020. [Info]
[180]	Frohn-Sörensen, P., Mašek, B., Wagner, M. F.-X., Rubešová, K., Khalaj, O., Engel, B.: Flexible manufacturing chain with integrated incremental bending and Q-P heat treatment for on-demand production of AHSS safety parts, Journal of Materials Processing Technology 275, 116312, 2020. [Info]
[179]	Illgen, C., Frint, P., Gruber, M., Volk, W., Wagner, M. F.-X.: Evolution of Grain Refinement in AA5083 Sheet Metal Processed by ECAP, in Light Metals 2020, Springer International Publishing, 2020, ISBN 978-3-03036-408-3, 362-369. [Info]
[178]	Scholze, M., Safavi, S., Li, K. C., Ondruschka, B., Werner, M., Zwirner, J., Hammer, N.: Standardized tensile testing of soft tissue using a 3D printed clamping system, HardwareX 8, e00159, 2020. [Info]
[177]	Schmitz, F., Winter, S., Clausmeyer, T., Wagner, M. F.-X., Tekkaya, A. E.: Adiabatic blanking of advanced high-strength steels, CIRP Annals 69, 269-272, 2020. [Info]
[176]	Graf, M., Fritsch, S. and Awiszus, B.: Determination of Forming Behaviour of EN AW-6060 by Different Testing Methods under Cold Bulk Forming Conditions, Procedia Manufacturing 47, 1512 - 1519, 2020. [Info]
[175]	Dieck, S., Ecke, M., Rosemann, P., Fritsch, S., Wagner, M. F.-X., Halle, T.: Strength Differential Effect in Martensitic Stainless Steel Under Quenching and Partitioning Heat Treatment Condition, in Plasticity, Damage and Fracture in Advanced Materials, Springer International Publishing, 2020, 35 - 42. [Info]
2019
[174]	Wagner, M. F.-X., Pfeiffer, S.: Prediction of NiTi B19$\prime$ Martensite Twin Activation Below a Spherical Indenter Tip, Shape Memory and Superelasticity 5, 313-326, 2019. [Info]
[173]	Frint, P., Kaiser, T., Mehner, T., Bruder, E., Scholze, M., Mašek, B., Lampke, T., Wagner, M. F.-X.: Strain-rate sensitive ductility in a low-alloy carbon steel after quenching and partitioning treatment, Scientific Reports 9, 17023, 2019. [Info]
[172]	Zwirner, J., Scholze, M., Waddell, J. N., Ondruschka, B., Hammer, N.: Mechanical Properties of Human Dura Mater in Tension - An Analysis at an Age Range of 2 to 94 Years, Scientific Reports 9, 2019. [Info]
[171]	Perumal, V., Scholze, M., Hammer, N., Woodley, S., Nicholson, H.: Load-deformation properties of the ligament of the head of femur in situ, Clinical Anatomy, 2019. [Info]
[170]	Frint, P., Wagner, M. F.-X.: Strain partitioning by recurrent shear localization during equal-channel angular pressing of an AA6060 aluminum alloy, Acta Materialia 176, 306-317, 2019. [Info]
[169]	Böhme, M., Sharafiev, S., Schumacher, E., Böhm, S., Wagner, M. F. X.: On the microstructure and the origin of intermetallic phase seams in magnetic pulse welding of aluminum and steel, Materialwissenschaft und Werkstofftechnik 50, 958-964, 2019. [Info]
[168]	Zwirner, J., Ondruschka, B., Scholze, M., Schulze-Tanzil, G., Hammer, N.: Mechanical and morphological description of human acellular dura mater as a scaffold for surgical reconstruction, Journal of the Mechanical Behavior of Biomedical Materials 96, 38-44, 2019. [Info]
[167]	Dittrich, F., Kaars, J., Masek, B., Jenicek, S., Wagner, M. F.-X., Mayr, P.: HAZ characterization of welded 42SiCr steel treated by quenching and partitioning, Journal of Materials Processing Technology 268, 37-46, 2019. [Info]
[166]	Ondruschka, B., Lee, J. H. C., Scholze, M., Zwirner, J., Tong, D., Waddell, J. N., Hammer, N.: A biomechanical comparison between human calvarial bone and a skull simulant considering the role of attached periosteum and dura mater, International Journal of Legal Medicine, 2019. [Info]
[165]	Zwirner, J., Scholze, M., Ondruschka, B., Hammer, N.: Tissue Biomechanics of the Human Head Are Altered by Thiel Embalming, Restricting Its Use for Biomechanical Validation, Clinical Anatomy, 2019. [Info]
[164]	Härtel, S., Awiszus, B., Graf, M., Nitsche, A., Böhme, M., Wagner, M. F.-X., Jirkova, H., Masek, B.: Influence of Austenite Grain Size on Mechanical Properties after Quench and Partitioning Treatment of a 42SiCr Steel, Metals 9, 577, 2019. [Info]
[163]	Lozano, P. F., Scholze, M., Babian, C., Scheidt, H., Vielmuth, F., Waschke, J., Ondruschka, B., Hammer, N.: Water-content related alterations in macro and micro scale tendon biomechanics, Scientific Reports 9, 2019. [Info]
[162]	Lee, J. H. C., Ondruschka, B., Falland-Cheung, L., Scholze, M., Hammer, N., Tong, D. C., Waddell, J. N.: An Investigation on the Correlation between the Mechanical Properties of Human Skull Bone, Its Geometry, Microarchitectural Properties, and Water Content, Journal of Healthcare Engineering 2019, 1-8, 2019. [Info]
[161]	Zwirner, J., Babian, C., Ondruschka, B., Schleifenbaum, S., Scholze, M., Waddell, N. J., Hammer, N.: Tensile properties of the human iliotibial tract depend on height and weight, Medical Engineering & Physics, 2019. [Info]
[160]	Pfeiffer, S., Fiedler, M., Bergelt, T., Kolouch, M., Putz, M., Wagner, M. F.-X.: On the correlation of hammer-peened surfaces and process, material and geometry parameters, IOP Conference Series: Materials Science and Engineering 480, 012021, 2019. [Info]
[159]	Winter, S., Pfeiffer, S., Bergelt, T., Wagner, M. F.-X.: Finite element simulations on the relation of microstructural characteristics and the formation of different types of adiabatic shear bands in a β-titanium alloy, IOP Conference Series: Materials Science and Engineering 480, 012022, 2019. [Info]
[158]	Johnson, S., Schultz, M., Scholze, M., Smith, T., Woodfield, J., Hammer, N.: How much force is required to perforate a colon during colonoscopy? An experimental study, Journal of the Mechanical Behavior of Biomedical Materials 91, 139-148, 2019. [Info]
[157]	Gruber, M., Illgen, C., Frint, P., Wagner, M.F.-X., Volk, W.: Numerical and Experimental Study on ECAP-Processing Parameters for Efficient Grain Refinement of AA5083 Sheet Metal, Key Engineering Materials 794, 315-323, 2019. [Info]
[156]	Hausner, S., Wagner, M. F.-X. and Wagner, G.: Microstructural Investigations of Low Temperature Joining of Q&P Steels Using Ag Nanoparticles in Combination with Sn and SnAg as Activating Material, Applied Sciences 9, 539, 2019. [Info]
[155]	Härtel, M., Illgen, C., Bruder, E., Frint, P., Wagner, M. F.-X.: Microstructural evolution during uniaxial tension-compression in-plane deformation of an IF steel, Materials Science and Engineering: A 744, 652 - 660, 2019. [Info]
[154]	Mehner, T., Scharf, I., Frint, P., Schubert, F., Mašek, B., Wagner, M.F.-X., Lampke, T.: Hydrogen embrittlement of a quenching and partitioning steel during corrosion and zinc electroplating, Materials Science and Engineering: A 744, 247-254, 2019. [Info]
[153]	Ramezani, M., Klima, S., Le Clerc de la Herverie, P., Campo, J., Le Joncour, J.-B., Rouquette, C., Scholze, M., Hammer, N.: In Silico Pelvis and Sacroiliac Joint Motion: Refining a Model of the Human Osteoligamentous Pelvis for Assessing Physiological Load Deformation Using an Inverted Validation Approach, BioMed Research International 2019, 1-12, 2019. [Info]
[152]	Lampke, T., Nestler, D., Böttger-Hiller, F., Helbig, F., Müller, S., Nickel, D., Roth-Panke, I., Ulke-Winter, L., Buschner, N., Czech, A., Hase, K., Jahn, K., Kolonko, A., Schindler, S., Scholze, M.: Bionisch inspirierte Hybridhalbzeuge, in Technologiefusion für multifunktionale Leichtbaustrukturen, L. Kroll, Ed., Springer-Verlag GmbH, 2019, ISBN 978-3-66254-733-5, 93-125. [Info]
[151]	Hockauf, K., Wagner, M. F.-X., Mašek, B., Lampke, T.: Mechanisms of fatigue crack propagation in a Q&P-processed steel, Materials Science and Engineering: A 754, 18 - 28, 2019. [Info]
[150]	Drossel, W.-G., Lampke, T., Landgrebe, D., Wielage, B., Riedel, F., Lindner, T., Mattheß, D., Scholze, M., Töberling, G., Zillmann, B.: Verfahrensansätze für hochpräzise Funktionsflächen, in Technologiefusion für multifunktionale Leichtbaustrukturen, L. Kroll, Ed., Springer-Verlag GmbH, 2019, ISBN 978-3-66254-733-5, 217-240. [Info]
[149]	Drossel, W.-G., Mehner, J., Nestler, D., Wagner, M. F.-X., Auerswald, C., Elibol, C., Helbig, F., Kolonko, A., Senf, B.: Funktionale Hybridtextilien mit passiven und aktiven Metall-Monofilamenten, in Technologiefusion für multifunktionale Leichtbaustrukturen, L. Kroll, Ed., Springer-Verlag GmbH, 2019, ISBN 978-3-66254-733-5, 265-299. [Info]
[148]	Burrow, K., Young, W., Carne, A., McConnell, M., Hammer, N., Scholze, M., Bekhit, A. E.: Consumption of sheep milk compared to cow milk can affect trabecular bone ultrastructure in a rat model, Food & Function, 2019. [Info]
2018
[147]	Hammer, N., Scholze, M., Kibsgård, T., Klima, S., Schleifenbaum, S., Seidel, T., Werner, M., Grunert, R.: Physiological in vitro sacroiliac joint motion: a study on three-dimensional posterior pelvic ring kinematics, Journal of Anatomy, 2018. [Info]
[146]	Klima, S., Grunert, R., Ondruschka, B., Scholze, M., Seidel, T., Werner, M., Hammer, N.: Pelvic orthosis effects on posterior pelvis kinematics An in-vitro biomechanical study, Scientific Reports 8, 2018. [Info]
[145]	Singh, A., Scholze, M. and Hammer, N.: On the influence of surface coating on tissue biomechanics \textendash effects on rat bones under routine conditions with implications for image-based deformation detection, BMC Musculoskeletal Disorders 19, 2018. [Info]
[144]	Böhme, M., Wagner, M. F.-X.: On the correlation of shear band formation and texture evolution in α-brass during accumulative roll bonding, Scripta Materialia 154, 172-175, 2018. [Info]
[143]	Lindner, T., Saborowski, E., Scholze, M., Zillmann, B., Lampke, T.: Thermal Spray Coatings as an Adhesion Promoter in Metal/FRP Joints, Metals 8, 769, 2018. [Info]
[142]	Elibol, C., Wagner, M. F.-X.: Virtual Extensometer Analysis of Martensite Band Nucleation, Growth, and Strain Softening in Pseudoelastic NiTi Subjected to Different Load Cases, Materials 11, 1458, 2018. [Info]
[141]	Stewart, R., Kieser, D. C., Scholze, M., Hammer, N., Stone, B., Hooper, G.: Preliminary biomechanical results of a novel pin configuration for external fixation of vertical shear pelvic fractures, ANZ Journal of Surgery 88, 1051-1055, 2018. [Info]
[140]	Falland-Cheung, L., Scholze, M., Lozano, P. F., Ondruschka, B., Tong, D. C., Brunton, P. A., Waddell, J. N., Hammer, N.: Mechanical properties of the human scalp in tension, Journal of the Mechanical Behavior of Biomedical Materials 84, 188-197, 2018. [Info]
[139]	Scholze, M., Singh, A., Lozano, P. F., Ondruschka, B., Ramezani, M., Werner, M., Hammer, N.: Utilization of 3D printing technology to facilitate and standardize soft tissue testing, Scientific Reports 8, 2018. [Info]
[138]	Mehner, T., Morgenstern, R., Frint, P., Scharf, I., Wagner, M. F.-X., Lampke, T.: Corrosion characteristics of a quenching and partitioning steel determined by electrochemical impedance spectroscopy, IOP Conference Series: Materials Science and Engineering 373, 012003, 2018. [Info]
[137]	Pouya, M., Balasubramaniam, S., Sharafiev, S., Wagner, M. F.-X.: Dynamic behavior of geometrically complex hybrid composite samples in a Split-Hopkinson Pressure Bar system, IOP Conference Series: Materials Science and Engineering 373, 012025, 2018. [Info]
[136]	Wagner, M. F.-X.: Light-Weight Aluminum-Based Alloys - From Fundamental Science to Engineering Applications, Metals 8, 260, 2018. [Info]
[135]	Jirková, H., Opatová, K., Wagner, M. F.-X., Mašek, B.: Physical Simulation of Press Hardening of TRIP Steel, in Proceedings of the International Conference on Martensitic Transformations: Chicago, Springer International Publishing, 2018, 135-141. [Info]
[134]	Zeidler, H., Klemm, D., Böttger-Hiller, F., Fritsch, S., Guen, M. J. L., Singamneni, S.: 3D printing of biodegradable parts using renewable biobased materials, Procedia Manufacturing 21, 117-124, 2018. [Info]
[133]	Graf, M., Härtel, S., Bauer, A., Förster, W., Bublikova, D., Wagner, M. F.-X., Awiszus, B., Masek, B.: Development of a Quenching-Partitioning Process Chain for Forging Components, Materials Science Forum 918, 85 - 92, 2018. [Info]
[132]	Kießling, R., Ihlemann, J., Riemer, M., Drossel, W.-G., Dittes, A., Scharf, I., Lampke, T., Sharafiev, S., Pouya, M., Wagner, M. F.-X.: A process and load adjusted coating system for metallic inserts in hybrid composites, Production Engineering 12, 249-257, 2018. [Info]
[131]	Habisch, S., Böhme, M., Peter, S., Grund, T., Mayr, P.: The Effect of Interlayer Materials on the Joint Properties of Diffusion-Bonded Aluminium and Magnesium, Metals 8, 138, 2018. [Info]
[130]	Scherzer, R., Fritsch, S., Landgraf, R., Ihlemann, J., Wagner, M. F.-X.: Finite Element Simulation of the Presta Joining Process for Assembled Camshafts: Application to Aluminum Shafts, Metals 8, 128, 2018. [Info]
[129]	Härtel, M., Pfeiffer, S., Schmaltz, S., Söhngen, B., Kulawinski, D., Willner, K., Henkel, S., Biermann, H., Wagner, M. F.-X.: On the identification of an effective cross section for a cruciform specimen, Strain 54, e12257, 2018. [Info]
[128]	Berndt, N., Frint, P. and Wagner, M. F.-X.: Influence of Extrusion Temperature on the Aging Behavior and Mechanical Properties of an AA6060 Aluminum Alloy, Metals 8, 51, 2018. [Info]
[127]	Horn, T. D., Silbermann, C. B., Frint, P., Wagner, M. F.-X., Ihlemann, J.: Strain Localization during Equal-Channel Angular Pressing Analyzed by Finite Element Simulations, Metals 8, 55, 2018. [Info]
[126]	Härtel, M., Frint, P., Abstoss, K. G., Wagner, M.F.-X.: Effect of Creep and Aging on the Precipitation Kinetics of an Al-Cu Alloy after One Pass of ECAP, Advanced Engineering Materials 20, 1700307, 2018. [Info]
[125]	Frint, P., Härtel, M., Selbmann, R., Dietrich, D., Bergmann, M., Lampke, T., Landgrebe, D., Wagner, M. F.-X.: Microstructural Evolution during Severe Plastic Deformation by Gradation Extrusion, Metals 8, 96, 2018. [Info]
[124]	Fritsch, S., Wagner, M. F.-X.: On the Effect of Natural Aging Prior to Low Temperature ECAP of a High-Strength Aluminum Alloy, Metals 8, 63, 2018. [Info]
[123]	Falland-Cheung, L., Scholze, M., Hammer, N., Waddell, J. N., Tong, D. C., Brunton, P. A.: Elastic behavior of brain simulants in comparison to porcine brain at different loading velocities, Journal of the Mechanical Behavior of Biomedical Materials 77, 609-615, 2018. [Info]
[122]	Härtel, M., Illgen, C., Frint, P., Wagner, M. F.-X.: On the PLC Effect in a Particle Reinforced AA2017 Alloy, Metals 8, 88, 2018. [Info]
2017
[121]	Sen, I., Roy, S. and Wagner, M.F.-X.: Indentation Response and Structure-Property Correlation in a Bimodal Ti–6Al–4V Alloy, Advanced Engineering Materials 19, 1700298, 2017. [Info]
[120]	Berndt, N., Frint, P., Böhme, M., Wagner, M.F.-X.: Microstructure and mechanical properties of an AA6060 aluminum alloy after cold and warm extrusion, Materials Science and Engineering: A 707, 717 - 724, 2017. [Info]
[119]	Herold, F., Schmidt, A., Frint, P., Götze, U., Wagner, M. F.-X.: Technical-economic evaluation of severe plastic deformation processing technologies\textemdashmethodology and use case of lever-arm-shaped aircraft lightweight components, The International Journal of Advanced Manufacturing Technology 94, 3619-3632, 2017. [Info]
[118]	Pfeiffer, S., Wagner, M.F.-X.: Elastic deformation of twinned microstructures, Proceedings of the Royal Society of London A: Mathematical, Physical and Engineering Sciences 473, 20170330, 2017. [Info]
[117]	R. Kießling, J. Ihlemann, M. Riemer, W.-G. Drossel, I. Scharf, T. Lampke, S. Sharafiev, M. Pouya, M.F.-X. Wagner: The Interface of an Intrinsic Hybrid Composite – Development, Production and Characterisation, Procedia CIRP 66, 289 - 293, 2017. [Info]
[116]	Kauffmann-Weiss, S., Hahn, S., Weigelt, C., Schultz, L., Wagner, M.F.-X., Fähler, S.: Growth, microstructure and thermal transformation behaviour of epitaxial Ni-Ti films, Acta Materialia 132, 255-263, 2017. [Info]
[115]	Schmitz, F., Winter, S., Clausmeyer, T., Even, D., Colasse, C., Tekkaya, E.A., Wagner, M.F.-X.: Materials science-based simulation strategies for the adiabatic cutting process, Proc. of the 5th International Conference on Steels in Cars and Trucks, 2017. [Info]
[114]	Hahn, S., Schulze, A., Böhme, M., Hahn, T., Wagner, M. F.-X.: Thin NiTi Films Deposited on Graphene Substrates, Shape Memory and Superelasticity 3, 1-8, 2017. [Info]
[113]	Pfeiffer, S., Frint, P. and Wagner, M.F.-X.: Analysis of the complex stress state during early loading in cylindrical compression-shear specimens, IOP Conference Series: Materials Science and Engineering 181, 012025, 2017. [Info]
[112]	Winter, S., Schmitz, F., Clausmeyer, T., Tekkaya, A. E., Wagner, M.F.-X.: High temperature and dynamic testing of AHSS for an analytical description of the adiabatic cutting process, IOP Conference Series: Materials Science and Engineering 181, 012026, 2017. [Info]
[111]	Pouya, M., Winter, S., Fritsch, S., Wagner, M.F.-X.: A numerical and experimental study of temperature effects on deformation behavior of carbon steels at high strain rates, IOP Conference Series: Materials Science and Engineering 181, 012022, 2017. [Info]
[110]	Wagner, S., Härtel, M., Frint, P., Wagner, M.F.-X.: Influence of ECAP temperature on the formability of a particle reinforced 2017 aluminum alloy, IOP Conference Series: Materials Science and Engineering 181, 012039, 2017. [Info]
[109]	Härtel, M., Bohne, B. and Wagner, M.F.-X.: Microstructural evolution during tension-compression in-plane deformation of a pure aluminum sheet, IOP Conference Series: Materials Science and Engineering 181, 012024, 2017. [Info]
[108]	Frint, P., Wagner, M.F.-X., Weber, S., Seipp, S., Frint, S., Lampke, T.: An experimental study on optimum lubrication for large-scale severe plastic deformation of aluminum-based alloys, Journal of Materials Processing Technology 239, 222-229, 2017. [Info]
2016
[107]	Hahn, S., Wagner, M. F.-X.: Challenges During Microstructural Analysis and Mechanical Testing of Small-Scale Pseudoelastic NiTi Structures, Shape Memory and Superelasticity 2, 171-179, 2016. [Info]
[106]	Frint, S., Hockauf, M., Frint, P., Wagner, M. F.-X.: Scaling up Segal's principle of Equal-Channel Angular Pressing, Materials & Design 97, 502-511, 2016. [Info]
[105]	Sharafiev, S., Pabst, C., Wagner, M. F.-X., Groche, P.: Microstructural characterisation of interfaces in magnetic pulse welded aluminum/aluminum joints, IOP Conf. Ser.: Mater. Sci. Eng. 118, 012016, 2016. [Info]
[104]	Masek, B., Jirkova, H., Kucerova, L., Wagner, M. F.-X.: Obtaining a TRIP microstructure by thermomechanical treatment without isothermal holding, IOP Conf. Ser.: Mater. Sci. Eng. 118, 012024, 2016. [Info]
[103]	Härtel, M., Illgen, C. and Wagner, M. F.-X.: Experimental evaluation of Bauschinger effects during tension-compression in-plane deformation of sheet materials, IOP Conf. Ser.: Mater. Sci. Eng. 118, 012018, 2016. [Info]
[102]	Niemann, R., Hahn, S., Diestel, A., Backen, A., Schultz, L., Nielsch, K., Wagner, M. F.-X., Fähler, S.: Reducing the nucleation barrier in magnetocaloric Heusler alloys by nanoindentation, APL Mater. 4, 064101, 2016. [Info]
[101]	Winter, S., Wagner, M. F.-X.: On the effect of incremental forming on alpha phase precipitation and mechanical behavior of beta-Ti-10V-2Fe-3Al, IOP Conf. Ser.: Mater. Sci. Eng. 118, 012026, 2016. [Info]
[100]	Fritsch, S., Scholze, M. and Wagner, M. F.-X.: Influence of thermally activated processes on the deformation behavior during low temperature ECAP, IOP Conf. Ser.: Mater. Sci. Eng. 118, 012030, 2016. [Info]
[99]	Kießling, R., Ihlemann, J., Riemer, M., Drossel, W.-G., Scharf, I., Lampke, T., Sharafiev, S., Pouya, M., Wagner, M. F.-X.: On the development of an intrinsic hybrid composite, IOP Conf. Ser.: Mater. Sci. Eng. 118, 012017, 2016. [Info]
[98]	Schleifenbaum, S., Prietzel, T., Aust, G., Boldt, A., Fritsch, S., Keil, I., Koch, H., Möbius, R., Scheidt, H. A., Wagner, M. F.-X., Hammer, N.: Acellularization-Induced Changes in Tensile Properties Are Organ Specific - An In-Vitro Mechanical and Structural Analysis of Porcine Soft Tissues, PLOS ONE 11, 2016. [Info]
[97]	Lampke, T., Wagner, G. and Wagner, M. F.-X.: Preface, IOP Conf. Ser.: Mater. Sci. Eng. 118, 011001, 2016. [Info]
[96]	Sanli, A., Müller, C., Kanoun, O., Elibol, C., Wagner, M.F.-X.: Piezoresistive Characterization of Multi-walled Carbon Nanotube-Epoxy based Flexible Strain Sensitive Films by Impedance Spectroscopy, Composites Science and Technology 122, 18-26, 2016. [Info]
2015
[95]	Senf, B., Bucht, A., Drossel, W.-G., Elibol, C., Wagner, M.F.-X.: Characterization of shape memory alloy wires integrated into lightweight structures, Proc. of the 2nd International MERGE Technologies Conference, Chemnitz: Lothar Kroll, 2015, 181-188. [Info]
[94]	Elibol, C., Wagner, M.F.-X.: Strain rate effects on the localization of the stress-induced martensitic transformation in pseudoelastic NiTi under uniaxial tension, compression and compression–shear, Materials Science and Engineering: A 643, 194-202, 2015. [Info]
[93]	Sichting, F., Steinke, H., Wagner, M.F.-X., Fritsch, S., Hädrich, C., Hammer, N.: Quantification of material slippage in the iliotibial tract when applying the partial plastination clamping technique, Journal of the Mechanical Behavior of Biomedical Materials 49, 112-117, 2015. [Info]
[92]	Zillmann, B., Wagner, M.F.-X., Schmaltz, S., Schmidl, E., Lampke, T., Willner, K., Halle, T.: In-plane biaxial compression and tension testing of thin sheet materials, International Journal of Solids and Structures 66, 111-120, 2015. [Info]
[91]	Elibol, C., Wagner, M.F.-X.: Investigation of the stress-induced martensitic transformation in pseudoelastic NiTi under uniaxial tension, compression and compression-shear, Materials Science and Engineering: A 621, 76-81, 2015. [Info]
[90]	I. Vorel, K. Rubešová, O. Khalaj, K. Opatová, M.F.-X. Wagner: Analysis of Laser Welds on Steel Processed by Q-P Process, Proceedings of The Fourth International Conference On Advances in Mechanical, Aeronautical and Production Techniques - MAPT 2015, 29 - 32. [Info]
[89]	Mašek, B., Vančura, F., Aišman, D., Jirková, H., Wagner, M.F.-X.: Effect of Input Structure of Blank on Development of Final Structure when Processing at Temperatures between Solidus and Liquidus, Procedia Engineering 100, 722-729, 2015. [Info]
[88]	Mašek, B., Jirková, H., Aišman, D., Wagner, M.F.-X.: New Manufacturing Processes for Products from Ultra High Strength Steels, Proc. of the 5th International Conference on Accuracy in Forming Technology, 2015. [Info]
2014
[87]	Hockauf, K., Wagner, M.F.-X., Halle, T., Niendorf, T., Hockauf, M., Lampke, T.: Influence of precipitates on low-cycle fatigue and crack growth behavior in an ultrafine-grained aluminum alloy, Acta Materialia 80, 250-263, 2014. [Info]
[86]	Hammer, N., Huster, D., Fritsch, S., Hädrich, C., Koch, H., Schmidt, P., Sichting, F., Wagner, M.F.-X., Boldt, A.: Do Cells Contribute to Tendon and Ligament Biomechanics?, PLoS ONE 9, e105037, 2014. [Info]
[85]	Yin, Q., Zillmann, B., Suttner, S., Gerstein, G., Biasutti, M., Tekkaya, A.E., Wagner, M.F.-X., Merklein, M., Schaper, M., Halle, T., Brosius, A.: An experimental and numerical investigation of different shear test configurations for sheet metal characterization, International Journal of Solids and Structures 51, 1066-1074, 2014. [Info]
[84]	Vančura, F., Mašek, B., Aišman, D., Jirková, H., Wagner, M.F.-X., Böhme, M.: Modification of metastable microstructure of CPM15V steel by heat exposure after treatment in semi-solid state, Journal of Alloys and Compounds 586, 159-164, 2014. [Info]
[83]	Senf, B., Bucht, A., Drossel, W.-G., Auerswald, C., Schaufuß, J., Mehner, J., Elibol, C., Wagner, M.F.-X., Brisa, V.J.D., Schindler, S., Helbig, F.: Adaptive Verbundbauteile aus faserverstärktem Kunststoff und Formgedächtnislegierung, Proceedings: Mehrwert durch Textiltechnik : Tagungsband zur 14. Chemnitzer Textiltechnik-Tagung, 2014, 78-85. [Info]
[82]	Pabst, C., Sharafiev, S., Groche, P., Wagner, M.F.-X.: A Novel Method to Investigate the Principles of Impact Welding: Development and Enhancement of a Test Rig, Experimental and Numerical Results, Advanced Materials Research 966-967, 500-509, 2014. [Info]
[81]	Niemann, R., Diestel, A., Backen, A., Roessler, U.K., Behler, C., Hahn, S., Wagner, M.F.-X., Schultz, L., Faehler, S.: Controlling reversibility of the magneto-structural transition in first-order materials on the micro scale, Proc. 6th International Conference on Magnetic Refrigeration at Room Temperature (Thermag VI), 2014. [Info]
[80]	Härtel, M., Wagner, S., Frint, P., Wagner, M.F.-X.: Effects of particle reinforcement and ECAP on the precipitation kinetics of an Al-Cu alloy, IOP Conference Series: Materials Science and Engineering 63, 012080, 2014. [Info]
[79]	Groche, P., Wagner, M.F.-X., Pabst, C., Sharafiev, S.: Development of a novel test rig to investigate the fundamentals of impact welding, Journal of Materials Processing Technology 214, 2009-2017, 2014. [Info]
[78]	Berndt, C., Elibol, C., Drebenstedt, C., Drossel, W.-G., Kroll, L., Wagner, M.F.-X.: Gradierte Metallstrukturen mit Kunststoffanbindungen, Lightweight Design 7, 26-31, 2014. [Info]
2013
[77]	Pouya, M., Halle, T., Böhme, M., Elibol, C., Nickel, D., Lampke, T., Wagner, M.F.-X.: Finite element analysis of localized versus homogeneous transformation in pseudoelastic NiTi wires and coatings, Proc. Werkstofftechnisches Kolloquium, 2013, 291-297. [Info]
[76]	Pfetzing-Micklich, J., Somsen, C., Dlouhy, A., Begau, C., Hartmaier, A., Wagner, M.F.-X., Eggeler, G.: On the crystallographic anisotropy of nanoindentation in pseudoelastic NiTi, Acta Materialia 61, 602-616, 2013. [Info]
[75]	Jirková, H., Mašek, B., Wagner, M.F.-X., Langmajerová, D., Kučerová, L., Treml, R., Kiener, D.: Influence of metastable retained austenite on macro and micromechanical properties of steel processed by the Q&P process, Journal of Alloys and Compounds 615, 2013. [Info]
[74]	Jirková, H., Aišman, D., Sen, I., Wagner, M.F.-X., Behúlová, M., Kusý, M., Mašek, B.: Mini-Thixoforming of a Steel Produced by Powder Metallurgy, Solid State Phenomena 192-193, 500-505, 2013. [Info]
[73]	Hahn, S., Böhme, M., Trautmann, M., Nickel, D., Wagner, M.F.-X.: Untersuchungen zur NiTi-Dünnschichtabscheidung auf Kohlenstofffasern unter Einsatz einer metallischen Zwischenschicht, Proc. Werkstofftechnisches Kolloquium, 2013, 262-266. [Info]
[72]	Böhme, M., Hahn, S., Nickel, D., Wagner, M.F.-X.: Dehnungsmessung in Verbundwerkstoffen mit Hilfe von Formgedächtnislegierungen, Proc. Werkstofftechnisches Kolloquium, 2013, 282-290. [Info]
2012
[71]	Hockauf, M., Wagner, M.F.-X., Händel, M., Lampke, T., Siebeck, S., Wielage, B.: High-strength aluminum-based light-weight materials for safety components – recent progress by microstructural refinement and particle reinforcement, International Journal of Materials Research 103, 3-11, 2012. [Info]
[70]	Zillmann, B., Clausmeyer, T., Bargmann, S., Lampke, T., Wagner, M.F.-X., Halle, T.: Validation of Simple Shear Tests for Parameter Identification Considering the Evolution of Plastic Anisotropy, Technische Mechanik 32, 622-630, 2012. [Info]
[69]	Winter, S., Fritsch, S. and Wagner, M.F.-X.: Microstructural evolution and mechanical properties of β-titanium Ti-10V-2Fe-3Al during incremental forming, Proc. TMS 2012 - Volume 1: Materials Processing and Interfaces, Orlando, Florida, USA: Wiley, 833-840. [Info]
[68]	Wagner, S., Siebeck, S., Hockauf, M., Nestler, D., Podlesak, H., Wielage, B., Wagner, M.F.-X.: Effect of SiC-reinforcement and equal-channel angular pressing on microstructure and mechanical properties of AA2017, Advanced Engineering Materials 14, 388-393, 2012. [Info]
[67]	Sen, I., Jirková, H., Mašek, B., Böhme, M., Wagner, M.F.-X.: Microstructure and Mechanical Behavior of a Mini-Thixoformed Tool Steel, Metallurgical and Materials Transactions A 43, 3034-3038, 2012. [Info]
[66]	Seipp, S., Wagner, M.F.-X., Hockauf, K., Schneider, I., Meyer, L.W., Hockauf, M.: Microstructure, crystallographic texture and mechanical properties of the magnesium alloy AZ31B after different routes of thermo-mechanical processing, International Journal of Plasticity 35, 155-166, 2012. [Info]
[65]	Hockauf, K., Hockauf, M., Wagner, M.F.-X., Lampke, T., Halle, T.: Fatigue crack propagation in an ECAP-processed aluminium alloy - Influence of shear plane orientation, Materialwissenschaft und Werkstofftechnik 43, 609-616, 2012. [Info]
[64]	Fritsch, S., Scholze, M. and Wagner, M.F.-X.: Cryogenic forming of AA7075 by equal-channel angular pressing, Materialwissenschaft und Werkstofftechnik 43, 561-566, 2012. [Info]
[63]	Frint, P., Hockauf, M., Halle, T., Wagner, M.F.-X., Lampke, T.: The role of backpressure during large scale Equal-Channel Angular Pressing, Materialwissenschaft Und Werkstofftechnik 43, 668-672, 2012. [Info]
2011
[62]	Fritsch, S., Hunger, S., Scholze, M., Hockauf, M., Wagner, M.F.-X.: Optimisation of thermo mechanical treatments using cryogenic rolling and aging of the high strength aluminium alloy AlZn5.5MgCu (AA7075), Materialwissenschaft und Werkstofftechnik 42, 573-579, 2011. [Info]
[61]	Frint, P., Hockauf, M., Dietrich, D., Halle, T., Wagner, M.F.-X., Lampke, T.: Influence of strain gradients on the grain refinement during industrial scale ECAP, Materialwissenschaft und Werkstofftechnik 42, 680-685, 2011. [Info]
[60]	Zillmann, B., Härtel, M., Halle, T., Lampke, T., Wagner, M.F.-X.: Flow Behavior of Automotive Aluminum Sheets During In-Plane Uniaxial and Biaxial Compression Loading, Proc. of the 10th International Conference on Technology of Plasticity, 691-695, 2011. [Info]
[59]	Wagner, M.F.-X., Zwierlein, C. and Schmidt, K.P.: Vorwort, in Perspektiven - Forschungsfragen der Zukunft, NRW Akademie der Wissenschaften und Künste, Ed., Paderborn: Ferdinand Schoeningh GmbH, 2011, ISBN 978-3-50677-180-3, 7-11. [Info]
2010
[58]	Shutov, A.V.V., Kuprin, C., Ihlemann, J., Wagner, M.F.-X., Silbermann, C.: Experimentelle Untersuchung und numerische Simulation des inkrementellen Umformverhaltens von Stahl 42CrMo4, Materialwissenschaft und Werkstofftechnik 41, 765-775, 2010. [Info]
[57]	Hockauf, K., Halle, T., Hockauf, M., Meyer, L.W., Wagner, M.F.-X., Lampke, T.: Thermomechanische Optimierung mittels ECAP und Wärmebehandlung an einer Aluminiumlegierung der Automobil- und Luftfahrtindustrie, Materialwissenschaft und Werkstofftechnik 41, 756-764, 2010. [Info]
[56]	Fritsch, S., Hockauf, M., Schönherr, R., Hunger, S., Meyer, L.W., Wagner, M.F.-X.: Untersuchungen zum Einfluss von ECAP und Tieftemperaturwalzen auf die mechanischen Eigenschaften der Aluminiumlegierung 7075, Materialwissenschaft und Werkstofftechnik 41, 697-703, 2010. [Info]
[55]	Klärner, M., Bayreuther, V., Kuprin, C., Czech, A., Kausch, M., Kroll, L., Wielage, B., Nestler, D., Wagner, M.F.-X.: Ressourcenschonende Verbundstrukturen und Technologien durch Ultraleichtbau, Proceedings: Energieeffiziente Produkt- und Prozessinnovationen in der Produktionstechnik - 1. Internationales Kolloquium des Spitzentechnologieclusters eniPROD, 2010, 325-348. [Info]
[54]	Wagner, M.F.-X., Dey, S.R.R., Gugel, H., Frenzel, J., Somsen, C., Eggeler, G.: Effect of low-temperature precipitation on the transformation characteristics of Ni-rich NiTi shape memory alloys during thermal cycling, Intermetallics 18, 1172-1179, 2010. [Info]
[53]	Wagner, M.F.-X.: Microstructural and mechanical challenges in biomedical NiTi, J. Phys.: Conf. Ser. 240, 12004, 2010. [Info]
[52]	Young, M.L., Wagner, M.F.-X., Frenzel, J., Schmahl, W.W., Eggeler, G.: Phase volume fractions and strain measurements in an ultrafine-grained NiTi shape-memory alloy during tensile loading, Acta Materialia 58, 2344-2354, 2010. [Info]
[51]	Großmann, C., Schaefer, A. and Wagner, M.F.-X.: A finite element study on localized deformation and functional fatigue in pseudoelastic NiTi strips, Materials Science and Engineering: A 527, 1172-1178, 2010. [Info]
[50]	Zhou, N., Shen, C., Wagner, M.F.-X., Eggeler, G., Mills, M.J., Wang, Y.: Effect of Ni₄Ti₃ precipitation on martensitic transformation in Ti-Ni, Acta Materialia 58, 6685-6694, 2010. [Info]
[49]	Wagner, M.F.-X., Schaefer, A.: Macroscopic versus local strain rates during tensile testing of pseudoelastic NiTi, Scripta Materialia 63, 863-866, 2010. [Info]
[48]	Wagner, S., Podlesak, H., Siebeck, S., Nestler, D., Wagner, M.F.-X., Wielage, B., Hockauf, M.: Einfluss von ECAP und Wärmebehandlung auf Mikrostruktur und mechanische Eigenschaften einer SiC-verstärkten AlCu-Legierung, Materialwissenschaft und Werkstofftechnik 41, 704-710, 2010. [Info]
[47]	Schaefer, A., Wagner, M.F.-X., Pelegrina, J.L., Olbricht, J., Eggeler, G.: Localization Events and Microstructural Evolution in Ultra-Fine Grained NiTi Shape Memory Alloys during Thermo-Mechanical Loading, Advanced Engineering Materials 12, 453-459, 2010. [Info]
[46]	Pfetzing-Micklich, J., Wagner, M.F.-X., Zarnetta, R., Frenzel, J., Eggeler, G., Markaki, A.E., Wheeler, J., Clyne, T.W.: Nanoindentation of a Pseudoelastic NiTiFe Shape Memory Alloy, Advanced Engineering Materials 12, 13-19, 2010. [Info]
[45]	Peter, D., Eggeler, G. and Wagner, M.F.-X.: Microstructural Characterization of Lamellar Features in TiAl by FIB Imaging, Advanced Engineering Materials 12, 447-452, 2010. [Info]
[44]	Hockauf, K., Halle, T., Hockauf, M., Wagner, M.F.-X., Lampke, T.: Near-Threshold Fatigue Crack Propagation in an ECAP-Processed Ultrafine-Grained Aluminium Alloy, Materials Science Forum 667-669, 873-878, 2010. [Info]
[43]	Frint, P., Hockauf, M., Halle, T., Strehl, G., Lampke, T., Wagner, M.F.-X.: Microstructural Features and Mechanical Properties after Industrial Scale ECAP of an Al 6060 Alloy, Material Science Forum 667-669, 1153-1158, 2010. [Info]
[42]	Frint, P., Halle, T., Wagner, M.F.-X., Hockauf, M., Lampke, T.: Erfassung von Effekten beim Skalieren von ECAP am Beispiel einer 6000er Aluminiumlegierung, Materialwissenschaft und Werkstofftechnik 41, 814-821, 2010. [Info]
[41]	Frenzel, J., George, E.P., Dlouhy, A., Somsen, C., Wagner, M.F.-X., Eggeler, G.: Influence of Ni on martensitic phase transformations in NiTi shape memory alloys, Acta Materialia 58, 3444-3458, 2010. [Info]
2009
[40]	Wagner, M.F.-X.: Versprechen von Forschung und Technik – Selbstdarstellung und gesellschaftliche Wahrnehmung, in Designer-Baby. Diagnostik und Forschung am ungeborenen Leben’, Paderborn: Verlag Ferdinand Schöningh, 2009, ISBN 978-3-50676-694-6, 103-113. [Info]
[39]	Wagner, M.F.-X., Windl, W.: Elastic anisotropy of Ni₄Ti₃ from first principles, Scripta Materialia 60, 207-210, 2009. [Info]
[38]	Schaefer, A., Wagner, M.F.-X.: Strain mapping at propagating interfaces in pseudoelastic NiTi, Proc. of ESOMAT 2009, Prag, Tschechische Republik: EDP Sciences, 1-6. [Info]
[37]	Pfetzing, J., Schaefer, A., Somsen, C., Wagner, M.F.-X.: Nanoindentation of pseudoelastic NiTi shape memory alloys: Thermomechanical and microstructural aspects, International Journal of Materials Research 100, 936-942, 2009. [Info]
[36]	Pfetzing, J., Wagner, M.F.-X., Simon, T., Schaefer, A., Somsen, C., Eggeler, G.: TEM investigation of the microstructural evolution during nanoindentation of NiTi, Proc. of ESOMAT 2009, Prag, Tschechische Republik: EDP Sciences, 1-7. [Info]
[35]	Peter, D., Viswanathan, G.B., Wagner, M.F.-X., Eggeler, G.: Grain-boundary sliding in a TiAl alloy with fine-grained duplex microstructure during 750 °C creep, Materials Science and Engineering A 510-511, 359-363, 2009. [Info]
[34]	Peter, D., Pfetzing, J., Wagner, M.F.-X., Eggeler, G.: Microstructural anisotropy, uniaxial and biaxial creep behavior of Ti-45Al-5Nb-0.2B-0.2C, Materials Science and Engineering A 510-511, 368-372, 2009. [Info]
[33]	Norfleet, D.M., Sarosi, P.M., Manchiraju, S., Wagner, M.F.-X., Uchic, M.D., Anderson, P.M., Mills, M.J.: Transformation-induced plasticity during pseudoelastic deformation in Ni-Ti microcrystals, Acta Materialia 57, 3549-3561, 2009. [Info]
[32]	Heinen, R., Hackl, K., Windl, W., Wagner, M.F.-X.: Microstructural evolution during multiaxial deformation of pseudoelastic NiTi studied by first-principles-based micromechanical modeling, Acta Materialia 57, 3856-3867, 2009. [Info]
2008
[31]	Peter, D., Wagner, M.F.-X. and Eggeler, G.: Mikrostruktur und Kriechen einer stranggepressten TiAl-Legierung, Praktische Metallographie (Sonderband) 40, 317-322, 2008. [Info]
[30]	Wagner, M.F.-X., Windl, W.: Lattice stability, elastic constants and macroscopic moduli of NiTi martensites from first principles, Acta Materialia 56, 6232-6245, 2008. [Info]
[29]	Wagner, M.F.-X., Nayan, N. and Ramamurty, U.: Healing of fatigue damage in NiTi shape memory alloys, Journal of Physics D: Applied Physics 41, 185408, 2008. [Info]
[28]	Schäfer, A ., Olbricht, J. and Wagner, M.F.-X.: Monitoring localized deformation of pseudoelastic NiTi subjected to uniaxial loading, Proc. of ICOMAT 2008, 537-542. [Info]
[27]	Pfetzing, J., Wagner, M.F.-X., Zarnetta, R., Tak, K.-G., Eggeler, G.: Untersuchungen zum Einfluss der Kornorientierung auf Nanoindentation-Messungen an Reineisen, Practical Metallography 46, 63-76, 2008. [Info]
[26]	Pfetzing, J., Wagner, M.F.-X., Frenzel, J., Somsen, C., Eggeler, G.: Thermomechanical constraints on pseudoelasticity during nanoindentation of binary and ternary NiTi(Fe) alloys, Proc. of ICOMAT 2008, 639-644. [Info]
[25]	Peter, D., Pfetzing, J., Wagner, M.F.-X., Somsen, C., Pesicka, J., Skrotzki, B., Eggeler, G.: Quantitative Charakterisierung der Gefüge-Anisotropie einer stranggepressten TiAl-Legierung, Practical Metallography 45, 210-224, 2008. [Info]
[24]	Olbricht, J., Wagner, M.F.-X., Condó, A., Dlouhy, A., Groß mann, C., Kröger, A., Somsen, C., Eggeler, G.: A transmission electron microscopy procedure for in-situ straining of miniature pseudoelastic NiTi specimens, International Journal of Materials Research 99, 1150-1156, 2008. [Info]
[23]	Mentz, J., Frenzel, J., Wagner, M.F.-X., Neuking, K., Eggeler, G., Buchkremer, H.P., Stöver, D.: Powder metallurgical processing of NiTi shape memory alloys with elevated transformation temperatures, Materials Science and Engineering: A 491, 270-278, 2008. [Info]
[22]	Hasan, M., Schmahl, W.W., Hackl, K., Heinen, R., Frenzel, J., Gollerthan, S., Eggeler, G., Wagner, M., Khalil-Allafi, J., Baruj, A.: Hard X-ray studies of stress-induced phase transformations of superelastic NiTi shape memory alloys under uniaxial load, Materials Science and Engineering: A 481-482, 414-419, 2008. [Info]
[21]	Großmann, C., Schäfer, A. and Wagner, M.F.-X.: Finite element simulation of localized phase transformations in pseudoelastic NiTi shape memory alloys subjected to multi-axial stress states, Proc. of ICOMAT 2008, 525-530. [Info]
2007
[20]	Olbricht, J., Schäfer, A., Wagner, M.F.-X., Eggeler, G.: Characterization of transformation localization during pseudoelastic cycling of NiTi, Proc. of SMST 2007, 47-54. [Info]
[19]	Frotscher, M., Burow, J., Wagner, M.F.-X., Neuking, K., Eggeler, G., Schön, P., Böckmann, R.: Thermo-mechanical processing, microstructure and bending rotation fatigue of ultra-fine grained NiTiCr-wires, Proc. of SMST 2007, 149-157. [Info]
2006
[18]	Wagner, M., Frenzel, J. and Eggeler, G.: Localization of Deformation During Pseudo Elastic Cycling of Ultra Fine Grained NiTi Shape Memory Wires, Proc. of FATIGUE 2006, FT196 (auf CD). [Info]
[17]	Wagner, M.F.-X., Eggeler, G.: New aspects of bending rotation fatigue in ultra-fine-grained pseudo-elastic NiTi wires, International Journal of Materials Research 97, 1687-1696, 2006. [Info]
[16]	Wagner, M.F.-X., Eggeler, G.: Stress and strain states in a pseudoelastic wire subjected to bending rotation, Mechanics of Materials 38, 1012-1025, 2006. [Info]
[15]	Wagner, M., Eggeler, G.: Multiple stress plateaus during complex mechanical cycling of pseudo elastic NiTi wires, Proc. of SMST 2006, 579-587. [Info]
[14]	Humburg, M., Eggeler, G. and Wagner, M.: Thermo-Kombiventil – Thermomanagement im Standheizbetrieb, ATZ - Automobiltechnische Zeitschrift 108, 196-203, 2006. [Info]
2005
[13]	Krone, L., Mentz, J., Bram, M., Buchkremer, H.P., Stöver, D., Wagner, M., Eggeler, G., Christ, D., Reese, S., Bogdanski, D., Köller, M., Esenwein, S.A., Muhr, G., Prymak, O., Epple, M.: The Potential of Powder Metallurgy for the Fabrication of Biomaterials on the Basis of Nickel-Titanium: A Case Study with a Staple Showing Shape Memory Behaviour, Advanced Engineering Materials 7, 613-619, 2005. [Info]
2004
[12]	Wagner, M., Yu, J.-K., Kausträter, G., Eggeler, G.: Functional Fatigue of NiTi Shape Memory Coil Spring Actuators, Proc. of ACTUATOR 2004, 629-632. [Info]
[11]	Wagner, M., Frenzel, J. and Eggeler, G.: Evolution of microstructural parameters during cycling of NiTi and their effect on mechanical and thermal memory, Proc. of SMST 2004, 103-109. [Info]
[10]	Wagner, M., Sawaguchi, T., Kausträter, G., Höffken, D., Eggeler, G.: Structural fatigue of pseudoelastic NiTi shape memory wires, Materials Science and Engineering: A 378, 105-109, 2004. [Info]
[9]	Wagner, M., Richter, J., Frenzel, J., Grönemeyer, D., Eggeler, G.: Design of a medical non-linear drilling device: The influence of twist and wear on the fatigue behaviour of NiTi wires subjected to bending rotation, Materialwissenschaft und Werkstofftechnik 35, 320-325, 2004. [Info]
[8]	Schmahl, W.W., Khalil-Allafi, J., Hasse, B., Wagner, M., Heckmann, A., Somsen, C.: Investigation of the phase evolution in a super-elastic NiTi shape memory alloy (50.7 at.%Ni) under extensional load with synchrotron radiation, Materials Science and Engineering A 378, 81-85, 2004. [Info]
[7]	Richter, J., Wagner, M., Grönemeyer, D., Eggeler, G.: Development and fatigue experiments of a novel nonlinear medical drilling device containing a flexible NiTi shaft, Proc. of SMST 2004, 131-136. [Info]
[6]	Khalil-Allafi, J., Schmahl, W.W., Wagner, M., Sitepu, H., Toebbens, D.M., Eggeler, G.: The influence of temperature on lattice parameters of coexisting phases in NiTi shape memory alloys---a neutron diffraction study, Materials Science and Engineering A 378, 161-164, 2004. [Info]
[5]	Khalil-Allafi, J., Hasse, B., Klönne, M., Wagner, M., Pirling, T., Predki, W., Schmahl, W.W.: In-situ diffraction investigation of superelastic NiTi shape memory alloys under mechanical stress with neutrons and with synchrotron radiation, Materialwissenschaft und Werkstofftechnik 35, 280-283, 2004. [Info]
[4]	Eggeler, G., Hornbogen, E., Yawny, A., Heckmann, A., Wagner, M.: Structural and functional fatigue of NiTi shape memory alloys, Materials Science and Engineering: A 378, 24-33, 2004. [Info]
2003
[3]	Sawaguchi, T.A., Kausträter, G., Yawny, A., Wagner, M., Eggeler, G.: Crack initiation and propagation in 50.9 at. pct Ni-Ti pseudoelastic shape-memory wires in bending-rotation fatigue, Metallurgical and Materials Transactions A 34, 2847-2860, 2003. [Info]
[2]	Richter, J., Bracke, A., Wagner, M., Eggeler, G., Grönemeyer, D.: Metallographische Untersuchungen von NiTi-Wellen eines nicht-linearen Bohrsystems für den mikrotherapeutischen Einsatz, Sonderband Praktische Metallographie 35, 475-480, 2003. [Info]
2002
[1]	Kausträter, G., Yawny, A., Wagner, M., Skrotzki, B., Eggeler, G.F.: Back Flow Creep Phenomena in Short Fibre Reinforced Aluminium Alloys, Materials Science Forum 396-402, 1303-1308, 2002. [Info]